{"product_id":"victron-phoenix-smart-ip43-charger-48-13-1-120-240v-psc481350095","title":"Victron Phoenix Smart IP43 Charger 48\/13 (1) 120-240V - PSC481350095","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003eThe \u003cb\u003eVictron Phoenix Smart IP43 Charger 48\/13 (1)\u003c\/b\u003e is a 48V, 13A adaptive battery charger with a single output for one battery bank. Natural convection cooled, with Bluetooth built in and a wide 85–250VAC input (90–375VDC), it suits off-grid, marine and backup power systems.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eIts adaptive 6-stage charge algorithm (3-stage for Li-ion) charges both lead-acid and LiFePO₄ batteries, with Normal, High and Lithium modes selectable from the mode button and a fully programmable algorithm via Bluetooth or VE.Direct. Set up, monitor and update it from the VictronConnect app, or connect it to a GX device such as the Cerbo GX for full system integration.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e the AC mains cord is ordered separately. For Australian and New Zealand installations, add the \u003ca href=\"\/products\/victron-mains-cable-au-nz-for-phoenix-smart-charger-ip43-skylla-s-charger-2m-ada010100300\"\u003eVictron Mains Cable AU\/NZ 2m (ADA010100300)\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eHigh-Performance Charging Design\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli class=\"p1\"\u003e13A charge current to a single 48V battery bank (6.5A low current mode)\u003c\/li\u003e\n  \u003cli class=\"p1\"\u003eUp to 96% efficiency at 230VAC (94% at 120VAC)\u003c\/li\u003e\n  \u003cli class=\"p1\"\u003ePower factor \u0026gt;0.99 and natural convection cooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eInherently Safe Battery Charging\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli class=\"p1\"\u003eAdaptive 6-stage algorithm: bulk, absorption, recondition, float, storage, refresh\u003c\/li\u003e\n  \u003cli class=\"p1\"\u003eVariable absorption time — short after shallow discharges, extended after deep discharges\u003c\/li\u003e\n  \u003cli class=\"p1\"\u003eBatterySafe mode limits excessive gassing; Storage mode reduces float voltage when the battery is not in use\u003c\/li\u003e\n  \u003cli class=\"p1\"\u003eProtected against battery reverse polarity, output short circuit and over temperature\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eLithium (LiFePO₄) Ready\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli class=\"p1\"\u003eDedicated Lithium mode: 56.8V absorption, 54V storage\u003c\/li\u003e\n  \u003cli class=\"p1\"\u003eRemote on\/off port for control from a Li-ion BMS relay or optocoupler output\u003c\/li\u003e\n  \u003cli class=\"p1\"\u003eFull control of charge voltage and current via Bluetooth\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eIntegrated Monitoring \u0026amp; Control\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli class=\"p1\"\u003eBluetooth Smart built in — set up, monitor, control and update with VictronConnect\u003c\/li\u003e\n  \u003cli class=\"p1\"\u003eVE.Direct interface for a wired connection to a GX device, with Instant Readout remotely from VRM\u003c\/li\u003e\n  \u003cli class=\"p1\"\u003eVE.Smart Networking: battery voltage and temperature sensing from a Smart Battery Sense, SmartShunt or BMV-712, plus synchronised charging across multiple Smart IP43 Chargers\u003c\/li\u003e\n  \u003cli class=\"p1\"\u003eProgrammable relay (SPDT) to trip on alarms or other events\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; System Integration\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli class=\"p1\"\u003e85–250VAC input (full power from 100VAC) or 90–375VDC\u003c\/li\u003e\n  \u003cli class=\"p1\"\u003eScrew battery terminals for cables up to 16mm² (AWG6)\u003c\/li\u003e\n  \u003cli class=\"p1\"\u003eIEC 320 C14 AC inlet with retainer clip — mains cord ordered separately (\u003ca href=\"\/products\/victron-mains-cable-au-nz-for-phoenix-smart-charger-ip43-skylla-s-charger-2m-ada010100300\"\u003eADA010100300\u003c\/a\u003e for AU\/NZ)\u003c\/li\u003e\n  \u003cli class=\"p1\"\u003eCan also be used as a power supply, with output voltage set via Bluetooth or VE.Direct\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eOperating Environment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli class=\"p1\"\u003eIP43 aluminium enclosure\u003c\/li\u003e\n  \u003cli class=\"p1\"\u003eOperating range -20 to 60°C (rated output up to 40°C, derating linearly to 20% at 60°C)\u003c\/li\u003e\n  \u003cli class=\"p1\"\u003eHumidity up to 95% (non-condensing)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47628564431026,"sku":"PSC481350095","price":521.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/9711\/0962\/files\/Victron-Smart-IP43-Charger-48-13-1.jpg?v=1791234553","url":"https:\/\/www.dpa.energy\/products\/victron-phoenix-smart-ip43-charger-48-13-1-120-240v-psc481350095","provider":"DPA Energy","version":"1.0","type":"link"}